 |
FLUORAT-AE-2 Automatic Oil-in-water Analyzer
|
|
Description
|
 |
|
Is based on the solvent extraction of petroleum hydrocarbons from water and on measuring their fluorence intensity in a flow cell.
Two basic modifications:
FLUORAT-AE-2, measuring range 0,01-5 mg/l;
FLUORAT-AE-2ñ, measuring range 0,1-200 mg/l.
| Features and benefits
|
| continuous and quasi- continuous on-line monitoring |
microprocessor based control |
| unaffected by coexisting suspended
particulate matter |
digital data processing |
| multiple sample streams |
nonvolatile memory |
|
| SPECIFICATIONS
|
| Measuring range |
0.01 – 200 mg/l |
| Sample temperature range |
+0.5 to +50°C |
| Sample pressure range |
0.1 to 10 atm |
| Measuring rate |
1 to 4 measurements per hour |
| Number of sampling points |
1 to 4 |
| Operating temperature range |
+5 to +50°C |
| Operating relative air humidity at +25°C |
<80% |
| Operating atmospheric pressure |
84 to 106.7 kPa |
| Status signal output NORM, ALARM, and LIMIT |
NORM, ALARM, and LIMIT |
| Outputs |
isolated 4 - 20 mA dc, RS-232 |
| Power requirements |
110 Vac, 60 Hz; 220 Vac, 50 Hz; 12 Vdc |
| Power consumption |
100 W |
| Size |
500x660x200 mm
(20”x26”x8”) |
| Weight |
20 Kg (44 lbs.) |
|
- FLUORAT-AE-2 automatic oil-in-water analyzer
- kit of spare parts and accessories
- hydroseal [for analysis of water under overpressure]
- flow switching device and valves [for several sampling points]
FLUORAT-AE-2 automatic oil-in-water analyzer is covered by a 12-month warranty.
Analysis of a technological process and recommendations to choose proper analyzer configuration. Our service engineers perform installation and commissioning of FLUORAT-AE-2 automatic oil-in-water analyzer at Customer's site. Consultations and initial training specific to the Customer needs are given to the personnel. Spare parts are delivered and repair is made upon Customer's request (free within the warranty period).
|
|